AP Mechanic C26 Aircraft

The NLL Aircraft Mechanic performs organizational and intermediate level maintenance on C-26 aircraft. Is responsible for servicing, troubleshooting, repairing and modifying aircraft systems to ensure continued airworthiness. These tasks are performed on avionics and electrical systems, environmental systems, engines, flight controls and airframe components. Repairs are performed using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns, and drills. Reads and interprets manufacturers#8217; and airline#8217;s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs servicing, troubleshooting and repairs on aviation ground support equipment.Essential Duties: The following tasks are examples of the effort required to perform the duties outlined in the purpose of the position. The list is not all-inclusive. Aircraft Mechanic - Major work tasks/responsibilities

  • Comply with written company maintenance and logistics procedures.
  • Comply with FAA regulations as applicable.
  • Know, understand and comply with the requirements outlined in the Life Cycle Contractor Support (LCCS) statement of work.
  • Comply with aircraft records procedures and outlined in DA Pam 738-751.
  • Ensure aircraft discrepancies are properly recorded and corrected in accordance with approved maintenance procedures and within the terms of the contract..
  • Maintain a clean and organized workspace.
  • Perform aircraft launch and recovery missions as necessary.
  • Deploy to overseas locations with unit aircraft to support operational requirements.
  • Perform other duties assigned by PTI Management.
Category: 
Maintenance
Company: 
Precision Turbines
Job Type: 
Permanent
City: 
Kekaha
JobReq: 

Required experience:

  • Minimum of two years flight line experience
  • Experience on C-26 Turbo Prop aircraft preferred.
  • Fixed wing aircraft experience preferred but not necessary. Rotary wing experience acceptable.

Required education:

  • High school diploma or equivalent.

Other Requirements:

  • Possess a valid FAA Aircraft & Power plant (A&P) license for a minimum of two years demonstrating compliance with FAR 65.83, Recent Experience Requirement

Working Conditions:

  • Work is usually conducted in an office, warehouse and aircraft hangar atmosphere.
  • Exposed to typical aircraft maintenance conditions such as engine noise, riveting, dust and chemical fumes, none of which to the extent of being intolerable. Hearing, vision and breathing protection provided in appropriate areas.
  • Some exposure to elements of weather when traveling and/or commuting between buildings.
  • May require extensive travel.
  • Overtime may be required on occasion.

Physical and Mental Conditions:

  • Normal physical exertion required for periods of working on feet or standing.
  • Requires lifting of items weighing up to 50 pounds.
  • Requires kneeling on occasion in performance of duties.
  • Requires ability to twist, bend, squat, climb and/or other body movements to successfully accomplish the requirements of the position.
  • Requires the use of either or both hands for grasping items.
  • Manual dexterity and the ability to push/pull, i.e.: open/close file cabinets and/or handle machinery is required.
  • Requires the ability to reach above shoulder height in accomplishing job tasks.
  • Requires the ability to walk on uneven surfaces.
  • Sufficient vision required to successfully accomplish the requirements of the position.
  • Requires sustained periods of concentration.

Precision Turbines Inc. is an equal opportunity/affirmative action employer; M/F/D/V are especially encouraged to apply.

State: 
Hawaii