Job Listings

  • Seasonal Heli-ski, fire, and utility work primarily in remote Alaska
  • All travel paid by company
  • Lodging provided by company and per diem paid to pilot while on job.

Position Type: Seasonal (March-April for heli-ski May-Sept for fire/utility)

Looking for an experienced Aircraft painter. Commercial helicopter experience a plus.REGULAR ASSIGNED DUTIES AND REQUIRED PERFORMANCE STANDARDS:1. Mix primers and paints to manufacturer's specifications2. Spray primers, paints, and clear coat finishes3. Apply high quality finish with all coatings4. Layout stripes according to prints5. Log paint usage and waste6.

The North Warning System (NWS) is a joint United States and Canadian radar system that includes 47 radar sites spanning the Arctic from Labrador to the Alaska border.

The Army Aviation Heritage Foundation and Flying Museum is a unique organization focused on presenting our flying aircraft to the public. Operating the largest civilian fleet of flying U.S. Army aircraft in the United States, the foundation honors the men and women who have served our country and connects the American public to the rich history of Army Aviation.

The North Warning System (NWS) is a joint United States and Canadian radar system that includes 47 radar sites spanning the Arctic from Labrador to the Alaska border.

A P Helicopter MechanicSafari Helicopters is a well established FAA Part 133 and Part 135 Air Carrier performing helicopter charters and tours of the Hawaiian Islands. We currently have an opening for an FAA licensed Airframe and Powerplant Technician (A P) for our Lihue - Kauai, Hawaii base.

Aircraft Mechanic 1SCA 23021Location: USCG Aviation Logistics Center #8211; Elizabeth City, NCFLSA: HourlyUnionStatus: Full-timeContract Status: ActiveDuties and responsibilities:The Aircraft Mechanic I duties shall include, but are not limited to: ·Service, repair, and overhaul aircraft to ensure airworthiness.

Date Posted:Country:Location:Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry.

Responsible for keeping parts inventory on hand to support our mechanics. To perform functions assigned in the material accountability of pre-draw and ordering of material for and during aircraft maintenance projects.

For over 35 years Remote Helicopters has provided helicopter services to clients throughout North and South America utilizing a fleet of light, intermediate and medium helicopters. Operating in a challenging and dynamic environment, our team of aviation professionals are committed to providing thesafe, efficient, and personalized service required to ensure a positive customer experience.

Core Responsibilities

BlueSky Helicopters in Los Angeles is seeking a qualified Part 133/135 Chief Pilot. BlueSky is a Part 133, 135 and 137 helicopter operator. The Company operates H-60L, A+, A and B206 airframes and specializes in firefighting and utility operations. Aircraft are based in the Los Angeles area. Living in the Los Angeles is not mandatory but is preferred.

If you are interested in a ground-floor opportunity with great potential then Advanced AeroWorks and Avionics, LLC is great place to start! We are a new repair and maintenance facility in Indiana PA; we are currently operating with Piper, Cessna, and Robinson Aircraft. We would like to expand our capabilities and grow our facility, so we are looking for the first of many Aircraft Technicians.

We currently have openings for avionics technicians in Coatesville, PA working on rotorcraft.

Description:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards and follow the production schedule.MUST HAVES: 1.

  • Troubleshoots, repairs and services aircraft and engine systems, installation of critical dynamic components (gear boxes, driveshafts, and rotor blades), control rods and landing gear.
  • Must be able to use and interpret various types of test equipment and work from maintenance manuals and wiring diagrams.

Description:Avionics Technicians will be working on one of two different helicopter assembly lines.Install, troubleshoot and repair electrical wiring and avionics equipment on green AW139aircrafts.ASSIGNED DUTIES: •Read and interpret wiring diagrams•Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams•Run and Mark wire to install complex wiring and electrical systems

OVERVIEWTo function as a Base Mechanic in accordance with Air Evac EMS, Inc. (AEEMS) General Operations Manual and Policies and Procedures. To assist with coverage of open shifts as needed in assigned area.

*POSITION IS IN HUNTSVILLE, AL!*Description:Currently seeking Structures Mechanics for CH-47 programs where theyll be doing the fist half of a reset (breaking down the aircraft and depopulating the aircraft parts and components).Skills:Folks will have 5 years experience doing modifications, resets, phase, or depot level maintenanceTop Skills Details:5+ years experience Any aircraft experience w

Description:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards and follow the production schedule.MUST HAVES: 1.

Description:Avionics Technicians will be working on one of two different helicopter assembly lines.Install, troubleshoot and repair electrical wiring and avionics equipment on green AW139aircrafts.ASSIGNED DUTIES: •Read and interpret wiring diagrams•Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams•Run and Mark wire to install complex wiring and electrical systems

Description:Currently seeking Structures Mechanics that on their Boeing Apache DPop program, SH-60, and CH-47 programs where theyll be doing the fist half of a reset (breaking down the aircraft and depopulating the aircraft parts and components).Theyll initially be working on the AH-64s, but will likely be utilized on the L2G (UH-60) program as well.The L2G program is an upgrade on the UH-60L m

The Site Safety Specialist will develop and administer safety related regulations and standards pertaining to the maintenance and operation of aircraft.Principal AccountabilitiesWork collaboratively with Program Quality Department to develop, implement and sustain a behavioral quality-based program Implement Program-sponsored best practices for Safety and Health quality assurance processes; dev

Description:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards and follow the production schedule.Preferred Experience: 1.

Description:Preferred Experience:1. Minimum 4 years of aircraft Sheetmetal or composites assembly experience 2. Must have experience in basic aircraft structural experience such as riveting and lay out work3. Experience in aerospace composites **open to military, fixed wing experience4. Must be open to working OT5. Must have own basic toolspreferred: 1.

Pages