Job Listings

BlueSky Helicopters in Los Angeles is seeking a qualified Part 133/135 Chief Pilot. BlueSky is a Part 133, 135 and 137 helicopter operator. The Company operates H-60L, A+, A and B206 airframes and specializes in firefighting and utility operations. Aircraft are based in the Los Angeles area. Living in the Los Angeles is not mandatory but is preferred.

If you are interested in a ground-floor opportunity with great potential then Advanced AeroWorks and Avionics, LLC is great place to start! We are a new repair and maintenance facility in Indiana PA; we are currently operating with Piper, Cessna, and Robinson Aircraft. We would like to expand our capabilities and grow our facility, so we are looking for the first of many Aircraft Technicians.

OVERVIEWTo function as a Base Mechanic in accordance with Air Evac EMS, Inc. (AEEMS) General Operations Manual and Policies and Procedures. To assist with coverage of open shifts as needed in assigned area.

  • Troubleshoots, repairs and services aircraft and engine systems, installation of critical dynamic components (gear boxes, driveshafts, and rotor blades), control rods and landing gear.
  • Must be able to use and interpret various types of test equipment and work from maintenance manuals and wiring diagrams.

We currently have openings for avionics technicians in Coatesville, PA working on rotorcraft.

Description:Avionics Technicians will be working on one of two different helicopter assembly lines.Install, troubleshoot and repair electrical wiring and avionics equipment on green AW139aircrafts.ASSIGNED DUTIES: •Read and interpret wiring diagrams•Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams•Run and Mark wire to install complex wiring and electrical systems

Helicopter Structures Technician$28.00-$34.00/hour with perdiem split Looking to hire immediately!! Description:MUST HAVES:1. Minimum 4 years of aircraft Sheetmetal or composites assembly experience 2. Must have experience in basic aircraft structural experience such as riveting and lay out work3. Experience in aerospace composites **open to military, fixed wing background4.

Helicopter Assembly Line Mechanic$28.00-$33.00/hour and perdiem splitavailableDescription:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards

Description:MUST HAVES:1. Minimum 4 years of aircraft Sheetmetal or composites assembly experience 2. Must have experience in basic aircraft structural experience such as riveting and lay out work3. Experience in aerospace composites **open to military, fixed wing background4. Must be open to working OT5. Must have own basic toolspreferred: 1.

Description:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards and follow the production schedule.MUST HAVES: 1.

The Site Safety Specialist will develop and administer safety related regulations and standards pertaining to the maintenance and operation of aircraft.Principal AccountabilitiesWork collaboratively with Program Quality Department to develop, implement and sustain a behavioral quality-based program Implement Program-sponsored best practices for Safety and Health quality assurance processes; dev

Description:A P Helicopter Mechanic Located in Philadelphia PAWill be working in a small hangar environment with A P mechanics, avionics techs, sheetmetal mechanics, and composites techs.

Description:Preferred Experience:1. Minimum 4 years of aircraft Sheetmetal or composites assembly experience 2. Must have experience in basic aircraft structural experience such as riveting and lay out work3. Experience in aerospace composites **open to military, fixed wing experience4. Must be open to working OT5. Must have own basic toolspreferred: 1.

Description:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards and follow the production schedule.Preferred Experience: 1.

Description:The technician will be responsible for installing all mechanical parts on the assembly of the helicopter, such as rotor head, transmissions, engines, hydraulic lines and flight controls, working in areas that may be cramped and/or little room.The technician will work from engineering drawings and job cards and follow the production schedule.MUST HAVES: 1.

Description:Avionics Technicians will be working on one of two different helicopter assembly lines.Install, troubleshoot and repair electrical wiring and avionics equipment on green AW139aircrafts.ASSIGNED DUTIES: •Read and interpret wiring diagrams•Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams•Run and Mark wire to install complex wiring and electrical systems

Description:Currently seeking Structures Mechanics that on their Boeing Apache DPop program, SH-60, and CH-47 programs where theyll be doing the fist half of a reset (breaking down the aircraft and depopulating the aircraft parts and components).Theyll initially be working on the AH-64s, but will likely be utilized on the L2G (UH-60) program as well.The L2G program is an upgrade on the UH-60L m

Description:Avionics Technicians will be working on one of two different helicopter assembly lines.Install, troubleshoot and repair electrical wiring and avionics equipment on green AW139aircrafts.ASSIGNED DUTIES: •Read and interpret wiring diagrams•Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams•Run and Mark wire to install complex wiring and electrical systems

*POSITION IS IN HUNTSVILLE, AL!*Description:Currently seeking Structures Mechanics for CH-47 programs where theyll be doing the fist half of a reset (breaking down the aircraft and depopulating the aircraft parts and components).Skills:Folks will have 5 years experience doing modifications, resets, phase, or depot level maintenanceTop Skills Details:5+ years experience Any aircraft experience w

We are pioneers. We were the first to break the sound barrier and design the first functional jetpack. We were aboard NASA’s first lunar mission and brought advanced tiltrotor systems to market. Today, we are defining the future of on-demand mobility. At Bell, we are proud to be an iconic company with superb talent, rapidly creating novel and coveted vertical lift experiences.

Airframe Design EngineerBell is seeking a self-motivated airframe design engineer to join Bell rsquo;s V-280 Valor Team and support the development of this new product.   The Airframe Design Engineer is responsible for design activities related to the preparation and release of engineering data related to the development of this aircraft.

We are pioneers. We were the first to break the sound barrier and design the first functional jetpack. We were aboard NASA rsquo;s first lunar mission and brought advanced tiltrotor systems to market. Today, we are defining the future of on-demand mobility. At Bell, we are proud to be an iconic company with superb talent, rapidly creating novel and coveted vertical lift experiences.

 We are pioneers.  We were the first to break the sound barrier and to design the first functional jetpack.  We were aboard NASA rsquo;s first lunar mission and brought advanced tiltrotor systems to market. Today, we are defining the future of on-demand mobility.

Description:*Candidate will be required to analyze and define Requirements*Create Specifications*Perform Subcontractor Technical Management*Draft Schematics *Review and Approve Supplier Documents*Create Test plans, Lab Aircraft*Write Test Reports

Description:Candidates with bachelors or master’s degrees in electrical, systems, or computer engineering as well as computer science, physics or mathematics should explore the opportunities available in the Owego Systems engineering organization.

Pages